SANITARY BIMETAL THERMOMETERS

TRU MEASURE OF QUALITY - At Tel-Tru we continually make investments to expand and improve our capabilities and our capacity to produce thermometers that are the world-standard for quality workmanship and accuracy. This heavy duty thermometer is approved to 3A Standard Number 74-03, Sanitary Standard for sensors and sensor fittings and connectors used in milk and milk products. Other applications include food and beverage processing and the pharmaceutical industry.

No thermowell is required because a Tri-Clamp® sanitary fitting is integral to the thermometer, reducing installation and instrument costs.

STANDARD SANITARY BIMETAL THERMOMETER SPECIFICATIONS INCLUDE:

Stem Lengths: 1-5/8, 2-1/2, 4-1/2, 7-1/2, 10-1/2, 13-1/2, 16-1/2, and 22-1/2".
Stem Diameter: .375" standard. .250" optional.
Connection: 316SS Tri-Clamp fitting sizes 3/4*, 1-1/2**, 2, 3, and 4".
External Reset: Easy to calibrate by inserting Allen wrench into reset opening.
Material: 316L SS wetted parts, 304SS non-contact parts.
Hermetic seal: Per ASME B40.3 dustproof and leakproof.
Dial: True Anti-Parallax dial, easy-to-read from any angle, minimizes reading errors. Anodized aluminum with large black numbers and graduations.
Lens: Glass, tempered glass, safety glass, acrylic, or polycarbonate.
Bimetal Coil: Helix coil is silicone coated on ranges below 500°F for vibration dampening and to
maximize heat transfer and response time.
Accuracy: ±1% full span per ASME B40.3 Grade AA.
Over Temperature Limits: Up to 250°F 100%; 250°F to 550°F, 50%; 550°F to 1000°F, continuous use up to 800°F, intermittent use over 800°F.
Pressure Tested: Up to 250 psi.
* Used on both 1/2 and 3/4" lines.
** Used on both 1 and 1-1/2" lines.